TENER 350® – Partial denture alloy with high strength
Indications
– Filigree palatal coverages
– Implant bars
– Attachments
Typical values
| yield strength RP 0,2 % (MPa) | > 500 |
| elongation (%) | > 2 |
| young’s modul (GPa) | > 150 |
| tensile strength (MPa) | 800 |
| density (g/cm3) | 8,3 |
| casting temperature (°C) | 1520 |
| WAK CTE (25 – 500°C) |
not relevant |
| hardness (HV 10/30) | < 450 |
| dimensions (mm) | Ø 8 x 15 |
| type acc. DIN EN ISO 22674 | ≥ Type 5 as delivered |
Lot numbers may show minimum deviation from typical values.
More information are available on our instruction for use.
Chemical Composition
| Co | Cr | Mo | W | Fe | Si | Mn | Others |
| 62 | 29,3 | 5,8 | 0,7 | 0,6 | 0,5 | 0,5 | < 0,1 |